My Construction Calculator
Browse CategoriesTile & Paint

TILE & PAINT · FIELD TOOL

Tile Spacer Calculator

Cross spacers = (rows − 1) × (columns − 1), plus T pieces where joints meet the walls. A 5 × 4 m floor in 600 mm tiles is 9 × 7 tiles: 48 crosses and 28 T pieces (84 with 10% spare). Large tiles also need levelling clips, about 242 at 350 mm spacing.

Free Account Required

Sign up free with your email or Google to use this calculator. It takes under a minute and unlocks every calculator on the site.

Sign Up Free

Behind this panel: an example with the default sizes.

Inputs

Results update as you type.

Area
m
m
Tile
mm
mm
mm
Spacers
mm
Tile layout with spacers5 m4 m9 × 7 = 63 tiles · 84 pcs (1 pack of 250)myconstructioncalculator.com
Diagram updates as you type.

Results

Check the working before you order.

3.0 mm spacers
84pcs (1 pack of 250)
Crosses at intersections48
T / edge pieces at the walls28
Levelling clips242 pcs (3 × 100)
Tile layout9 × 7 = 63 tiles
Price This optional: add your own prices

Your prices are remembered on this device only.

Send Order WhatsApp, SMS or email to your supplier
Include
WhatsAppSMSEmail
Working
  1. Layout: 9 tiles along × 7 across
  2. Crosses = (rows − 1) × (cols − 1) = 48; T pieces = 2(rows − 1) + 2(cols − 1) = 28; × 1.10 spare = 84
  3. Clips: ⌈joint length ÷ 350 mm⌉ per joint over 110 joints × 1.10 = 242
Results are estimates for planning and material ordering only. They are not a substitute for structural design or approval by a qualified engineer. Read the full disclaimer.
Method


Crosses        = (rows − 1) × (cols − 1)
T / edge       = 2(rows − 1) + 2(cols − 1)
Joint segments = (rows − 1) × cols + rows × (cols − 1)
Upright        = Σ segments × ⌈tile side ÷ 350 mm⌉
Clips          = Σ segments × ⌈tile side ÷ clip spacing⌉


Worked example


5 × 4 m, 600 × 600 mm tiles, 3 mm joints, crosses at the corners, levelling clips every 350 mm, 10% spare:


    

  1. Layout = 9 × 7 tiles
    2. 

  2. Crosses = 8 × 6 = 48; T pieces = 12 + 16 = 28 → 76 × 1.1 = 84 spacers
    3. 

  3. Joints = 6 × 9 + 7 × 8 = 110, 2 clips each → 220 × 1.1 = 242 clips
    4. 



Spacers and clips per m² (crosses, 350 mm clip spacing, no spare)






Tile
Crosses per m²
Clips per m²






300 × 300 mm
≈ 11
n/a (not usually needed)




450 × 450 mm
≈ 5
≈ 20




600 × 600 mm
≈ 2.8
≈ 11




600 × 1200 mm
≈ 1.4
≈ 8






Frequently Asked Questions
How many tile spacers do I need per tile?
About one cross spacer per tile when laid flat at the corners, since each intersection is shared by four tiles. Used upright along the joints, allow one or two per side depending on tile size.
How many levelling clips per tile?
Usually one clip every 200–400 mm along each joint, about 4 per tile for 600 × 600 mm tiles at 350 mm spacing, and more for long planks.
Which spacer size should I use?
Match the joint the tile maker recommends, often 2–3 mm for wall tiles and rectified floor tiles, 3–5 mm for standard floor tiles, and wider for rustic tiles.
Tile CalculatorCalculate how many tiles and boxes you need for a floor or wall, with grout joints and wastage, plus tile adhesive and grout in kg or lb.Tile Wastage CalculatorCalculate tile wastage from the actual layout (full and cut tiles, edge cut sizes for corner or centred starts) plus pattern, breakage and spare allowances. Free accountTile Adhesive CalculatorCalculate tile adhesive in kg and bags, with the trowel notch suggested from tile size, coverage for that notch, and back-buttering for large tiles.Tile Grout CalculatorCalculate tile grout in kg and bags from tile size, thickness and joint width, with grout per m² and total joint length. Cementitious or epoxy grout. Free account
All Tile & Paint Calculators